How To Repair Car Dents?

How to repair car dents? There is no denying that no car owner would like a dent in their vehicle. It tends to spoil their self-esteem by driving a car with dents on it. If you would like to know how to get rid of dents from your car, then you are in luck. We are going to share with you some fabulous tips. If you are feeling curious, then let us get started right away.

Here are some fabulous home remedies on how to repair car dents. Removing dents from the cars is not tough provided you have a systematic approach. Just follow the tips mentioned below and you will have no problems removing dents. Have a look at the tips and educate yourself.

Pot And Vacuum Cleaner

Applying suction is a very effective way to get rid of any dent. You can sometimes have a hard time finding a tool with the appropriate suction. You can put your very own tool together. You need a vacuum and a pot. You will also need a bit of tape and you are set to get rid of any dent from your car.

All you have to do is make a really small hole at the bottom of the pot you have to attach the pot using the tape on the area that is dented. Put the hose of the vacuum cleaner through the hole and turn it on. The powerful suction should remove the dent.

Knockdown and Metal Rod

When there is a dent in your car, it creates a volcano-like formation on the surface. In this scenario treating the dent from the bottom is not the solution. Instead, it should be addressed from both sides. For this, you will need a tap tool and a metal rod, slightly longer. This method produces fabulous results.

Screws, Wooden Dowels, And Hot Glue

Now there is always a possibility that you may cause further damage while trying to repair dents. However, by using hot glue, screws, and dowels made of wood you can exercise some caution.

All you have to do is put two nails on wither sides of a dowel and the hot glue in the bottom. Then placed the glued surface of the dowel on the dented area and let it dry. Pull out the dowels one by one and you will see that the dents have disappeared. You may have to repeat the process a couple of times.

The Dry Ice Method

Dry ice is mostly used as an agent to facilitate cooling, but this is very effective to get rid of dents from any car. For this procedure, you will have to wear proper gloves to protect your hands. Take a chunk of the ice and keep rubbing it on the dent. You should hear a popping noise, this means that the car dent has been fixed.

You may have to rub the ice many times to get the desired results. If you notice that the dents are very deep then apply some heat to the dent and then apply the ice.

Compressed Air And Hair Dryer

This is a very popular method used by many people to remove car dents. You have to begin by applying a lot of hot air from the dryer on the plastic surface of the car. The heat will make the plastic expand. As soon as the surface has reached maximum temperature, spray the compressed air. This will cause contractions on the plastic surface which will make the dent disappear.

Boiling Water

Bumpers made of plastic can be difficult to deal with. So, if you decide to dismantle the bumper to remove dents it is as tough as they tend to be stiff. However, you can get rid of dents in plastic bumpers by throwing boiling water on them. After you have done this simply give the dent a push from behind and it will pop back into shape.

Plunger

Now, many people will discourage you from using this to eliminate dents, but it works. This is a very cost-effective home remedy. All you have to do is throw water on the dented surface and the plunger and then pull and push. Keep repeating the process until you hear a pop that means it worked. Remember to use a plunger that is used to clean sinks.

Dent Removal Kits

Use this as a last resort only if you are not going to do any of the above methods. There are many such kits available in the market. You must always buy from a reputed brand to get the best results.

Get Professional Help

If you are unsure about the methods listed above, you can hire a car repair professional to help to get it done. The professionals use state-of-the-art technology and besides, they have the experience to deal with complicated cases.

Many professionals in Singapore provide dent removal services, but not all of them are up to the mark. So, you have to be very careful about who you hire. Take the time to look up names on the internet. Read reviews to get a clearer idea of the whole thing. Ask the professionals to give you an appointment, get them to inspect your car.

After that, they are going to give you a written quote on how much they are going to charge you. Make sure that you collect multiple price quotes to make sure that you are being charged fair prices as per the industrial standards. Also, do not forget to take recommendations from your friends and family members too.

Conclusion

So, how to repair car dents? Here is all you need to know about removing dents from your car in the best possible way. You have to be a little patient for the result to show. Some of the home remedies are easy, but they have to be performed repeatedly and it needs to be done carefully. So, make sure you do not rush the process and take things slow.